Opti-ups IS5000LR User Manual download pdf (Page 13)

3. INSTALLATION

3.1 Inspecting the packing carton for damage that may have occurred while in transit. Immediately

notify the carrier and place of purchase if any damage is found. Retain the package for future use.

3.2 Plugging the power cord to a 3-wire grounding receptacle. If an extension cord must be used

between the INVERTER AND UPS and the nearest wall outlet, use a 3-wire grounding type with

rating, at least, for full load of input current as stated in item 8, Specifications.

3.3 Connecting your equipment to the UPS. To ensure that your computer equipment will be

protected during a utility failure, it is important to make sure that the maximum power needed by the

equipment is not over the rated capacity of the UPS. Red LED will light up (LED version), or the

“Over load” symbol will show up (LCD version), and alarm will beep if the load is over the rated value.

Meantime, if the overload is severe, the UPS will shut down immediately for protecting UPS itself.

3.4 If you are going to use the setting software (i.e. UPS Wizard), connect your computer to the

communication port of UPS (RS-232) with the supplied communication cable.

3.5 After installation with normal city power, the UPS will charge the battery automatically; please

keep the UPS in charging for 5 hours, at least.

3.6 Important Safety Instruction

SAVE THESE INSTRUCTIONS. This manual is important instructions that you should follow

during installation and maintenance of the UPS and batteries. Please read all instructions before

operating the equipment and save this manual for future reference.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

No comments

Opti-ups IS5000LR User Manual Page 13