Opti-ups VS575C User Manual download pdf (Page 16)

10 VS375C/VS575C

ViewSonic G810

120V 2.7A

50 / 60 Hz

SN: Q771515388

Computer Co

Pentium Pro 200MHz

120V 2.0A

50/60 Hz

SN: 123456

3. Multiply the voltage and current of each piece of equipment (VA requirements); for

example, 120V x 2.7A = 324VA, 120V x 2.0A = 240VA.

Add up the VA requirements for all the devices; for example, 324VA + 240VA =

564VA.

4. Make sure that your UPS has at least as much VA capacity as your equipment

requires.

3.4 Powering Up Your UPS

1. For 100/110V/120V versions, connect the power cord to a grounded 3-wire

receptacle. For 220V/230V/240V versions, please refer to Sec 3.5 .

2. Power up the UPS by pressing the On/Off switch on the front panel for three seconds.

3. We recommend that you charge the battery for six (6) hours before first use of your

UPS. You may use the UPS immediately without charging the battery, but the

backup time may be less than the rating. The UPS recharges the battery

automatically whenever AC power is available.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Opti-ups VS575C User Manual Page 16